BQ1953-2:
Used Graffenstaden Horizontal Facing & Boring Machine
- Type 7077/1
- Table size 70" x 86", with 10 tee slots. Table rotates 360 degrees.
- Table longitudinal traverse 70", cross traverse 70"
- Head stock rise & fall 46"
- Table drive motor 15HP x 1500 RPM
- Boring head driven motor 20HP x 1500 RPM
- Facing head diameter 40", with 7" slide offset movement
- Spindle diameter 5". Bore MT6.
- Spindle traverse 30"
- Max distance from facing head to tailstock 160"
- Tailstock support rise & fall 58", by power
- Spindle speeds 10-270 RPM, off 16
- Facing speeds 2-53 RPM, off 16
- Radial feed of tool support on plate per revolution 0.010"-0.119", off 8
- Spindle feed per revolution in inches 0.0015-0.25, off 12
- Plate feed per revolution in inches 0.008-1.25, off 12
- Pendant control, Rapid traverse, Boring stay powered
- Dimensions: 25' length x 13' width x 15' height
- Weight approximately 50 tons
If you require additional information on this machine
or on any other new or used horizontal borers (horizontal boring mills, horizontal boring machines, horizontal drilling machines) that we carry,
please let us know. We would be more than happy to assist.
For sales enquiry, please contact Zhongyang Engineering through
telephone, fax or email.
Home |
Horizontal Borers Listing |
Machinery Categories
Zhongyang is the appointed regional supplier for China Czech machinery.
|
Graffenstaden
5" Horizontal Borer
Table 86" x 70"
Face Head Dia 40"
Kearns 4"
Horizontal Borer
Top Table 48" x 48"
Richards PRT3N
Horizontal Borer
Spindle 3.1/2" Dia
|
