|
(Photograph Is Not Available)
BT070901: Used Asquith 7" Spindle Travelling Floor Borer & Miller
- Facing Head 42" Dia.
- C/w Milling Head
- Driving flange of milling sleeve diameter 16"
- Travel of ram 3'
- Travel of spindle in ram 4'
- Vertical travel of slide on column 10'
- Horizontal travel of column on bed 20'
- Width of bed over slideways 8'
- Range of speeds, infinitely variable with use of mechanical changes and variable speed motor 1 to 365 rpm
- No. of feed changes to ram and spindle 12
- Range of feeds 0.0083 to 0.10"
- Feeds to slide and column infinitely variable
- Range of feeds per minute 0.020 to 60"
- Lowest spindle speed at which full power is available 32 rpm
- Feed motor for column on bed, Micro setting and quick power traverse 15 HP
- Feed motor for slide on column, Micro setting and quick power traverse 15 HP
- Micro setting motor for ram and spindle 3/4 HP
- Rate of quick power traverses in inches per min 100"
- Micro setting rate in inches per min. to slide & column 0-2"
- Micro setting rate in inches per min. to ram and spindle 0-1"
- Dimensions for ram 20" X 26"
- Speed of high speed layshaft - maximum 1100 rpm
- Minimum height from underside of bed to spindle 6'
- Bore of spindle nose no. 7 Morse standard
- Approximate weight 116,000 kgs
If you require additional information on this machine
or on any other new or used floor boring milling machine (ram borer, floor boring machine, travelling borer, traveling boring mill) that we carry,
please let us know. We would be more than happy to assist.
For sales enquiry, please contact Zhongyang Engineering through
telephone, fax or email.
Home |
Floor Boring Milling Machine Listing |
Machinery Categories
Our customers remain loyal to us because of our commitment to after-sales service.
|
[featured/boringmachine.htm]
|
