LQ1881-2:
Used TOS Gap Bed Screwcutting Centre Lathe
- Type SN40
- Between center 1000mm
- Swing over bed 400mm
- Swing over slide rest 220mm
- Swing in gap 600mm
- Width of gap in front of locating plate 230mm
- Width of bed 450mm
- Maximum section of turning tool 32-20mm
- 12 steps speed range: 1st series 45 - 2000 rpm, 2nd series 22 - 1000 rpm
- Spindle bore 48mm
- Inside taper of spindle Morse 6
- Outside spindle nose CSN 20 1011 170mm
- Tailstock sleeve diameter 70mm
- Inside taper of tailstock sleeve Morse 5
- Tailstock sleeve advance 180mm
- Cross slide feed 300mm, Manual feed of top slide 140mm
- Slide rest feeds: number of longitudinal or cross steps 38
- Longitudinal range: with drive off spindle 0.05 - 0.8 mm/rev: with drive off countershaft 0.64 - 6.4 mm/rev
- Threads: 29 metric, 35 Whitworth, 26 module, 31 D.P.
- Motor 5 HP x 1500rpm
- Dimensions (LxWxH) 2575mm x 1100mm x 1600mm
- Weight approximately 1550 kgs
If you require additional information on this machine
or on any other new or used lathe (used lathe, metal lathe, gap bed lathe, straight bed lathe, facing lathe, engine lathe, center lathe, turning lathe, brake lathe, mini lathe, hobby lathe, screwcutting lathe, centre lathe, conventional lathe) that we carry,
please let us know. We would be more than happy to assist.
For sales enquiry, please contact Zhongyang Engineering through
telephone, fax or email.
Home |
Lathe Listing |
Machinery Categories
If you are considering inexpensive machinery, call us for China machinery.
|
China 3000mm Lathe
Between Centers 3000 mm
Swing Over Bed 800 mm
China CW62110B Lathe
Between Centers 5000mm
Swing Over Bed 1100mm
Binns & Berry
Hydraulic Lathe
Max Swing 96"
Between Centers 11'6"
|
