NLLYC007:
New, China CD6250B/1000 Lathe
- Between Centers 1000 mm
- Swing Over Bed 500 mm
- Swing Over Saddle 325 mm
- Swing In Gap 630 mm
- Gap Width 260 mm
- Bed Width 330 mm
- Spindle Bore 65 mm
- Spindle Speeds 22-1800 RPM, Steps 15
- Metric Threads 0.5-28 mm, Off 66
- Inch Threads 1-56 / Inch, Off 66
- Module Threads 0.5-3.5 mm, Off 33
- Diametral Threads 8-56 DP, Off 33
- Longitudinal Feed Range 0.072-4.038 mm/rev, Off 66
- Cross Feed Range 0.036-2.019 mm/rev, Off 66
- Rapid Traverse of Carriage 5m/min
- Cross Slide Travel 330 mm
- Compound Rest Travel 130 mm
- Cross-Section of Toolshank 25x20 mm
- Tailstock Spindle Taper MT5
- Tailstock Spindle Diameter 65 mm
- Tailstock Spindle Travel 120 mm
If you require additional information on this machine
or on any other new or used lathe (used lathe, metal lathe, gap bed lathe, straight bed lathe, facing lathe, oil country lathe, engine lathe, center lathe, turning lathe, brake lathe, mini lathe, hobby lathe, screwcutting lathe, centre lathe, conventional lathe) that we carry,
please let us know. We would be more than happy to assist.
For sales enquiry, please contact Zhongyang Engineering through
telephone, fax or email.
Home |
Lathe Listing |
New Machinery Categories
Zhongyang Engineering - The specialist in metalworking and fabrication machinery.
|
China 3000mm Lathe
Between Centers 3000 mm
Swing Over Bed 800 mm
China CW62110B Lathe
Between Centers 5000mm
Swing Over Bed 1100mm
Binns & Berry
Hydraulic Lathe
Max Swing 96"
Between Centers 11'6"
|
