NLLYC025:
New, China C6266Y/3000 Lathe
- Between Centers 3000 mm
- Swing Over Bed 660 mm
- Swing Over Saddle 435 mm
- Swing In Gap 860 mm
- Gap Width 280 mm
- Bed Width 400 mm
- Spindle Bore 103 mm
- Spindle Speeds 9-1275 RPM, Off 18 (Reverse Speeds 16-816 RPM, Off 6)
- Metric Threads 0.5-112 mm, Off 72
- Inch Threads 56 - 1/4 per inch, Off 72
- Module Threads 0.5-7 mm, Off 36
- Diametral Threads 56-4 DP, Off 36
- Longitudinal Feed Range 0.073-4.066 mm/rev, Off 72
- Cross Feed Range 0.036-2.033 mm/rev, Off 72
- Cross Slide Travel 325 mm
- Compound Rest Travel 110 mm
- Cross-Section of Toolshank 32x32 mm
- Tailstock Spindle Taper MT6
- Tailstock Spindle Diameter 90 mm
- Tailstock Spindle Travel 150 mm
If you require additional information on this machine
or on any other new or used lathe (used lathe, metal lathe, gap bed lathe, straight bed lathe, facing lathe, oil country lathe, engine lathe, center lathe, turning lathe, brake lathe, mini lathe, hobby lathe, screwcutting lathe, centre lathe, conventional lathe) that we carry,
please let us know. We would be more than happy to assist.
For sales enquiry, please contact Zhongyang Engineering through
telephone, fax or email.
Home |
Lathe Listing |
New Machinery Categories
Zhongyang is the appointed regional supplier for China Czech machinery.
|
China 3000mm Lathe
Between Centers 3000 mm
Swing Over Bed 800 mm
China CW62110B Lathe
Between Centers 5000mm
Swing Over Bed 1100mm
Binns & Berry
Hydraulic Lathe
Max Swing 96"
Between Centers 11'6"
|
