Shaper


Churchill Redman 24" Heavy Duty Shaper

SE7322:

Used Churchill Redman 24" Heavy Duty Shaper

  • Table 18" x 16"
  • Table size 20.1/4" x 17" with 3 tee slots. Left to right movement of table 22".
  • Rise & fall of table 12". Swivels 60-0-60 degrees.
  • Rise & fall of toolbox on canting headstock 7" by hand or power
  • 8 speeds on gearbox, 8 total ram strokes 9 - 117
  • Motorised belt drive to gearbox 400/3/50 AC 10 HP @ 1460 rpm
  • Table will swivel horizontally 90-0-90 degrees. Top section will tilt to 15-0-15 degrees
  • Fitted with push button starter, swivelling machine vice, rear ram guard &       compound table 18" x 16" with 3 tee slots.
  • 8 x stroke per min 9-117
  • 11 x feed 0.010 to 0.170 inch/stroke
  • Rapid 2-axis
  • Swivels 2-axis
  • Overall Dimensions: 2,743 mm (L) x 1,448 mm (W) x 1,549 mm (H)
  • Weight approximately 5.0 ton

If you require additional information on this machine or on any other new or used shaper (shaping machine) that we carry, please let us know. We would be more than happy to assist.

For sales enquiry, please contact Zhongyang Engineering through telephone, fax or email.


Home | Shaper Listing | Machinery Categories


Zhongyang is the machinery partner that will fulfill your machinery needs while staying within your budget.

 


Butler 12" Slotter
Table Diameter 24"

 


Churchill Redman
24" Heavy Duty Shaper

 


Pensotti Planer
Table Size 6500 X 800 mm


Zhongyang - Leader in sales of new / used metalworking, fabrication machinery, and machine tools.
Copyright © 1969-2010 Zhongyang Engineering Sdn Bhd, Malaysia. All rights reserved.
Email: enquiry@zhongyang-engrg.com
Disclaimer Notice