NDRES001:
Taiwan RD-750 Radial Drilling Machine
- Drilling capacity: steel f38mm / cast iron f50mm
- Tapping capacity: steel f19mm / cast iron f25mm
- Boring capacity: steel f75mm / cast iron f105mm
- Spindle stroke / spindle taper: 200/MT4
- Spindle speeds 88 - 1500 RPM (6 speeds)
- Spindle feeds 0.05, 0.09, 0.15
- Column diameter 210mm
- Max. distance, spindle centre to column 775mm
- Min. distance, spindle centre to column 290mm
- Horizontal travel of headstock 485mm
- Max distance, from base to spindle 1110mm
- Min distance, from base to spindle 282mm
- M/C over height of column 1850mm
- M/C height from floor (max.) 2175mm
- Dimension of base: 1280mm (L) x 640mm (W) x 150mm (H)
- Main drive motor 2 HP
- Arm elevation motor 1 HP
- Coolant pump 1/8 HP
- Overall Dimensions: 1,425 mm (L) x 813 mm (W) x 2,057 mm (H)
- Weight approximately 1.2 ton
If you require additional information on this machine
or on any other new or used radial drill (radial drilling machine, radial arm drill, radial arm drilling machine) that we carry,
please let us know. We would be more than happy to assist.
For sales enquiry, please contact Zhongyang Engineering through
telephone, fax or email.
Home |
Radial Drill Listing |
New Machinery Categories
Zhongyang Engineering - Your quality machinery trading partner.
|
Archdale 5ft
Radial Drill
Drilling Dia 2"
Archdale
7ft Radial Drill
Drilling Dia 3"
Asquith OD2
8ft Radial Arm Drill
Max Drill Diameter 3"
|
